Description

The Hollis Side-Mount SMS75 is an evolution from years of side-mount development, which started with the SMS100. The Hollis Side-Mount System is a product that has been copied, modified and a benchmark for technical side-mount for years. Even more popular has been the lightweight SMS50 line. These two have taken side-mount mainstream and the building blocks this new harness. While it caters more to hardcore cave divers, SMS75 was created to handle all environments. Proper trim is key in side-mount diving and the wing is designed with a trapezoid shape to promote horizontal diving with increased lift towards the hips where it’s needed most, and without modification. The SMS75 will also support rear mounted tanks with cam slots for single tank and grommets at 11″ (27.9cm) for banded doubles and reversible inflator positions. The SMS75 Side-Mount System Harness comes equipped with stainless-steel D-rings on the shoulder straps with 4-pre-bent for accessory attachment. The harness has adjustable shoulder and sternum straps equipped with squeeze-style side-release buckles for easy donning and doffing. The Hollis SMS75 Harness has a stainless-steel latch-style waist buckle with adjustable crotch strap. The crotch strap is equipped with an additional stainless-steel D-rings for attachment of accessory or scooter. All hardware is manufactured from 316-marine-grade stainless-steel. The Hollis SMS75 Side-Mount System with inflator mechanism(s) and overpressure-relief/dump valve, is a 360° elastic bungee system (removable) wing that provides 35 lbs. (15.88 kg) of lift capacity. Bladder has a centrally located inflator mechanism elbow(s) to avoid tank valve/regulator interference, lower left pull dump/overpressure relief valve and the inflator system is made from durable impact resistant plastic with a corrugated rubber hose. The internal components and inlet quick-disconnect nipple are made from chrome plated brass. The SMS75 Side-Mount System is equipped with upper and lower cam band slots for single cylinder mounting. This bulletproof constructed wing is manufactured using 1000-Denier Cordura nylon with a polyurethane lamination outer shell & 15mm urethane internal bladder. The SMS75 Side-Mount System is streamlined designed for reduced drag and passing through confined spaces. The SMS75 Side-Mount System comes with a low pressure 3/8″ threaded quick-disconnect hose, owner’s manual, and rigging kit that Includes: Tank bungees, stainless-steel cam bands, stainless-steel bolt snaps and nylon line.